Correct purchase and construction of mosaics

2022-07-22
  • Detail

There are many specifications of mosaics on the market now. The thickness of glass mosaics is 2 ~ 3 mm, the thickness of ceramic mosaics is about 4 mm, and the thickness of stone mosaics is larger, generally about 1 cm. Due to the small area of mosaics, mosaics are sold in "pieces". A "piece" is composed of multiple pieces of mosaics connected by paper or plastic nets

there are many specifications of mosaics on the market now. The thickness of glass mosaics is 2 ~ 3 mm, the thickness of ceramic mosaics is about 4 mm, and the thickness of stone mosaics is larger, generally about 1 cm. Because the mosaic area is very small, mosaic is based on “ Slice ” To sell, one “ Slice ” It is formed by connecting multiple mosaic monomers through paper or plastic mesh

Mancini mosaic strong glow tiles

for example: the most common glass mosaic, one “ Slice ” It is 30cm x30cm. If the mosaic monomer area is 2.5cm x2.5cm, here “ Slice ” There are 12 X12 mosaics on the mosaic. In the building materials mall, “ Slice ” It's the smallest sales unit. In other words, buy at least “ A piece of &rdquo

connection method: generally, paper is used to connect glass mosaic, moire mosaic, gold wire mosaic and individual ceramic mosaic. Paper connection is usually pasted on the front of the mosaic; The plastic mesh connection includes crystal mosaic, bread brick, free stone ceramic mosaic and stone mosaic. The mesh connection is generally pasted on the back of the mosaic

construction common sense: first of all, it should be noted that when mosaic is laid in the bathroom, waterproof glue is required. Now the most conventional construction method is “ Cement +108 glue + joint sealant &rdquo

mosaic connected by plastic mesh: since the mesh is pasted on the back of the mosaic, during construction, it is directly brushed with cement, glued, pasted with mosaic, and finally hooked with sealant, that is, its mesh is finally connected to the mosaic

mosaic connected by paper: since the paper is pasted on the front of the mosaic, the mosaic construction steps are to brush cement first, then add caulking agent on the back of the paper, add glue, paste the mosaic, remove the paper, then brush caulking agent, wipe it clean, that is, remove the paper in the construction to expose the front of the mosaic

however, the paving effect of mosaic has a lot to do with the skill level. A good mosaic effect should have even gaps, horizontal and vertical mosaics, clean pointing, and flat mosaic surface

link: beware of six misunderstandings when choosing ceramic tiles for home decoration

all kinds of ceramic tiles are dizzying. There are tricks to choose good ceramic tiles

深圳试管婴儿医院

石家庄外阴白斑医院

义乌妇科医院

秦皇岛男科医院

Copyright © 2011 JIN SHI